Yes, the list is as follows:

Error Number

Error Type

Description

9

PEBADF

Invalid file descriptor

2

PENOENT

File not found or path to file not found

24

PEMFILE

No file descriptors available (too many files open)

17

PEEXIST

Exclusive access requested but file already exists

13

PEACCES

Attempt to open a read only file or a special (directory)

22

PEINVAL

Seek to negative file pointer attempted

28

PENOSPC

Write failed. Presumably because of no space

30

PESHARE

Open failed do to sharing

31

PEDEVICE

No Valid Disk Present

50

DSSFORM

DSS Format Error

60

CARDERR

Card format error or Card error

201

MMC_CARD_IS_NOT_RESPONDING

Time out error on card response

202

MMC_CMD_CRC_ERROR

CRC error detected on card response

203

MMC_DATA_CRC_ERROR

CRC error detected on incoming data block

204

MMC_DATA_STATUS_CRC_ERROR

Card is reporting CRC error on outgoing data block

205

MMC_CARD_IS_BUSY

Card is busy programming

206

MMC_CARD_IS_NOT_READY

Card did not complete its initialization and is not ready

207

MMC_COMUNC_CRC_ERROR

Card is reporting CRC error

208

MMC_COMUNC_ILLEG_COM

Card is reporting illegal command

209

MMC_ERASE_PARAM

Erase parameters error

210

MMC_WP_VIOLATION

Attempt to write a WP sector

211

MMC_ERROR

MMC card internal error

212

MMC_WP_ERASE_SKIP

Attempt to erase WP sector

213

MMC_ADDRESS_ERROR

Sector messaligned error

214

MMC_CARD_READ_FAILURE

Card is reporting Read command failed

215

MMC_INTERFACE_ERROR

Error detected by the MMC HW driver

216

MMC_ILLEGAL_MODE

Not support in the current mode

217

MMC_COMMAND_PARAMETER_ERROR 

Card is reporting Address-out-of-range error

218

MMC_ERASE_SEQ_ERROR

Error in the sequence of erase command

219

MMC_ERASE_RESET

Erase command canceled before execution

220

MMC_NO_CRC_STATUS

Time out on CRC status for Write

221

MMC_OVERRUN

Overrun

222

MMC_UNDERRUN

Underrun

223

MMC_CIDCSD_OVERWRITE

a) The CID register has been already written and can be overwritten.  
b) The read only section of CSD does not match the card content.   
c) An attempt to reverse the copy (set as original) or permanent WP bits was made.

224

MMC_CARD_ECC_DISABLED

The command has been executed without using the internal ECC

225

MMC_READ_FOR_DATA

Corresponds to buffer empty signalling on the bus

226

MMC_DATA_LENGTH_ERROR

Data Length more then 512 bytes.

227

MMC_TIME_OUT_RCVD

Time out receive data (B0 for controller)

228

MMC_OUT_OF_RANGE

Address out of range error

229

MMC_CARD_ECC_FAILED

Internal Card ECC failed

230

MMC_CARD_IS_LOCKED

Card is locked by host

231

MMC_LOCK_UNLOCK_FAILED 

 Lock/unlock card failed or access to locked card

232

MMC_PROG_MOD

card still in program mode / Record mode for DPM2*/

233

BARCODREADERROR

BC Read Barcode error

234

BARCODERROR

BC Barcode Set Error

500

ERR_USB_READ

error during USB-read-multi-block

501

ERR_USB_READ_END

error during USB-DataReadEnd()

502

ERR_USB_WRITE

error during USB-write-single-block

503

ERR_USB_WRITE_END

 error during USB-DataWriteEnd()

504

ERR_WRITE_DEL_FILE

delete corrupt file

600

Flash error

Flash setting error

602

ERR_ICC_Write

can’t communicate with ST7

603

ERR_ICC_Read

can’t communicate with ST7

IMPORTANT: If the suggested resolution above did not resolve your issue, please contact your Dealer (where you purchased the product from) for support.

If you do not have a dealer, let us be your partner. We offer affordable, annual support & maintenance packages to ensure you get the help you need. To learn more about how eDist can help you improve financial performance, raise the quality of care and increase customer satisfaction.

CLICK HERE for complete details about our available services.

Verification Source:  Jackie Warren, Philips Support Rep.

Test Date: 1.8.13